Loewe Centros 2172 HD, Centros 2102 HD manual What to do, if, Problem Possible cause Remedy

What to do, if ...

Problem	Possible cause	Remedy
No power	The mains cable is not plugged in..	Fix the mains cable firmly into a socket.
No image	The television is not switched to receive signals	Select the right video input mode on the television, so that
	from the DVD recorder.	the image from the DVD recorder appears on the television
		screen.
	The SCART cable is not properly connected.	Connect the SCART cable properly.
	The television that is connected is switched off.	Switch the television on.
No sound	The connected audio equipment is not switched to	Set the audio receiver so that you can hear the sound playing
	DVD playback.	on your DVD recorder.
	The audio cables are not properly connected.	Connect the audio cable properly.
	The connected audio equipment is switched off.	Switch on the audio equipment that is connected.
	The audio connection cable is faulty.	Change it.
Inferior picture quality.	The disc is dirty.	Clean the disc.
Playback not possible.	There is no disc.	Insert a disc. (Check that the disc display comes on in the
		display window.)
	A non-playable disc has been inserted.	Insert a writable disc. (Check the disc type, the colour system
		and the region code.)
	The disc has not been inserted with the playable	Insert the disc with the playable side downwards.
	side downwards.
	The disc has not been properly placed in the guide.	Position the disc properly into the guide in the disc drawer.
	The disc is dirty.	Clean the disc.
	A security rating has been set.	Cancel the security rating or change the protection.
There is interference with images from an	The video signal from the external component is	You cannot get a connection from this recorder. Connect the
external source.	copy-protected.	component directly into the television.
A channel is skipped when using P+ / P-.	The channels have not been saved in the recorder.	Retune the channels. See channel tuning on pages 18-19.
The image or sound on the transmission chan-	Loose antenna or cable.	Tighten the connections or change the cable.
nel is weak or absent.
The camcorder image is not displaying.	The camcorder is switched off.	Switch the camcorder and make sure your are using it
		properly.
The camcorder image is not appearing on the	The DVD recorder AV selection is wrong.	Select the input channel (AV1, AV2, DV etc.) with DVD-AV.
television screen when using the A/V input or
DV IN to the DVD recorder.
A disc that was recorded to from this DVD	The disc was recorded in video mode.	Finalising the disc (see page 26)
recorder cannot be played on a different DVD
player.

- 60