HDMI mode
HDMI (DVI) connection
The HDMI connection (High Defi ni- ton Multimedia Interface) allows
digital picture and sound transmis- sion via a connecting cable, e.g. to
Loewe Flat TV sets. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. In the equipment connected, no analogue/digital conver- sion is necessary, which might also have lead to losses in quality.
DVI signals can be also be reproduced by the HDMI connection using a DVI/HDMI adapter cable. This is possible because HDMI is based on DVI and is downwardly compatible. That means that the digital video signals are transmitted via HDMI - no audio signals are transmitted, though. In addition, both use the same copy protection method HDCP. (High Defi nition Content Protection).
1.Switch the TV set or monitor with HDMI connec- tion and the recorder off.
2.Connect the DVD recorder to a TV set or monitor with HDMI connection as described on page 14.
3.Then switch on the TV set or monitor, wait 30 seconds and then switch on the recorder.
4.Log in the HDMI connection in the TV set’s con- nection wizard (see TV set user guide).
5.If transmission takes place on a DVI/HDMI adapter cable, connect the analogue or digital audio outputs of Centros to the appropriate inputs of the TV set as described on page 15/16.
6.Leave the existing SCART connection as it is to record from the TV.
HDMI operation
1.Switch over the TV set to the HDMI AV input (happens automatically in connection with a Loewe Flat TV set).
2.Press the HDMI button on the front of Centros to switch over to digital video output.
3.Set the desired resolution on the front of Centros with the Pixel button. Press the Pixel button repeatedly to set the desired picture resolution (e.g. 576i, 576p, 720p, 1080i).
Note: You can only set resolutions within the scope of your TV’s capabilities. Select resolution 720p on Centros for optimum picture quality.
4.Press at Centros 
to open the disk drawer.
5.Load the selected disk in the drawer with the side to be played facing down.
6.Press at Centros 
to close the disk drawer.
7.Playing starts either automatically or by press-
ing 
or you have to make entries in the menu depending on the medium.
Notes:
1.The other sockets (VIDEO OUT,
2.With an HDMI connection the audio scanning frequency is only 48 kHz, even when selecting 96 kHz.
3.This recorder performs no internal
In order to enjoy DTS
4.If the “Dolby Digital” or “MPEG” option has not been set to “PCM” in the Setup menu (see page 22), no sound is output over the HDMI cable.
5.The HDMI connection to Centros is operated as a signal output. Please proceed as described on page 47 if you want to record from an external signal source with Centros.
- 30
