A794 Owner’s Guide | Chapter 2: Using the Printer |
Connect the Cables
Caution: Connect the cables to the printer before plugging in the power supply. If power is received from the host computer, turn it off before connecting any cables.
Communication
Connector
Connector shown)
ConnectorPower
CoverConnector
Back of
Printer
Note: Depending on your printer configuration, the connector panel may vary from the above illustration.
Communication Cable
The communication cable connects the printer to the host computer. To install the communication cable:
1.Turn off the host computer.
2.Open the Connector Cover at the rear of the printer.
3.Attach the Communication Cable to the connector shown on the back of the printer above. Tighten the screws to secure the cable.
4.Connect the cable to the host computer.
December 1999 | 9 |