M-S Cash Drawer A794 manual List of Commands and Location, By Command Code

A794 Owner’s Guide Chapter 6: Programming Information

List of Commands and Location

Commands control all operations and functions of the printer. This includes selecting the size and placement of characters and graphics on the receipt to feeding and cutting the paper. The operation of various printers may be emulated by the commands, including the following:

♦Axiohm A793

♦Axiohm A794 Native Mode

♦Epson TM-T88

Any of the commands may be used in any combination to program a host computer to communicate with the printer (unless otherwise noted).

Some commands listed and described here may not be implemented. They will be identified as “not implemented”. If received, they are ignored and not sent to the print buffer as data. Any non-legal commands are sent to the print buffer as data.

All items in BOLD are new or have additional functionality when compared to the

A793.

By Command Code

Code (Hexadecimal)	Command	Page
09	Horizontal Tab	72
0A	Print and Feed One Line	68
0C	Print and Return to Standard Mode	124
0D	Print and Carriage Return	68
10	Clear Printer	61
10 04 n	Real Time Status Transmission (DLE Sequence)	112
10 05 n	Real Time Request to Printer (DLE Sequence)	115
11 n1...n72	Print Raster Graphics	92
12	Select Double-Wide Characters	79
13	Select Single-Wide Characters	79
14 n	Feed n Print Lines	68
15 n	Feed n Dot Rows	69
16 n	Add n Extra Dot Rows	69
17	Print	70
18	Cancel Print Data in Page Mode	124
19	Perform Full Knife Cut	61
1A	Perform Partial Knife Cut	62
1B (+*.bmp)	Download BMP Logo	93
1B 07	Generate Tone	62
1B 0C	Print Data in Page Mode	125
1B 12	Select 90 Degree Counter-Clockwise Rotated Print	80
1B 14 n	Set Column	72
1B 16 n	Select Pitch (Column Width)	80
1B 20 n	Set Right-Side Character Spacing	81

December 1999 51