Chapter 4: Print Specifications | A794 Owner’s Guide |
Print Density and Density of Receipt Print Lines
This function makes it possible to adjust the energy level of the printhead to darken the printout. An adjustment should only be made when necessary. The factory setting is 100%.
Warning: Choose an energy level no higher than necessary to achieve a dark printout.
Failure to observe this rule may result in a printer service call or voiding of the printer warranty. Consult your Axiohm technical support specialist if you have any questions.
When the printer prints high density print lines (text or graphics), it automatically slows down.
To change the Print Density:
1.Enter the Configuration Menu.
2.Select “Set Hardware Options” from Main Menu.
“Hardware Options Menu” is printed on the receipt and the question “Set Print Density?” asked.
3.Answer YES (Long click).
A warning is printed, followed by:
Print Density |
|
| |
100% |
| 1 | Click |
110% | (+) | 2 | Clicks |
120% | (++) | 3 | Clicks |
Enter code, then hold Button DOWN at least 1 second to validate.
30 | December 1999 |
