M-S Cash Drawer A794 manual Select Superscript or Subscript Modes, Summary of Rotated Printing

A794 Owner’s Guide Chapter 6: Programming Information

Select Superscript or Subscript Modes

ASCII	AX ENQ n
Hexadecimal	1F 05 n
Decimal	31 05 n
Value of n:	0	= Normal character size
	1	= Select subscript size
	2	= Select superscript size
Default:	0	(normal size)

Turns superscript or subscript modes on or off. This attribute may be combined with other characters size settings commands (12, 13, 1B 21 n, 1D 21 n,…)

Exceptions

This command is ignored if n is out of the specified range.

Related Information

In A7193 Emulation, this command is unrecognized and the parameter byte is put into the print buffer.

Summary of Rotated Printing

The table shows the combinations of Set/Cancel Upside Down Print, Set/Cancel Rotated Print (clockwise), and Rotated Print (counterclockwise).

Rotated clockwise and Rotated counterclockwise print commands are mutually exclusive: The setting of the last received command is effective . Unintended consequences may result when Rotated clockwise is mixed with other commands.

The samples of the print show only the normal size characters. Double-wide and double-high characters are printed in the same orientation. They may also be mixed on the same line.

Upside Down	Rotated CW	Rotated CCW	Resulting Output
(1B 7B n)	(1B 56 n)	(1B 12)

Canceled	Canceled	Cleared
Canceled	Set	X
Set	Canceled	X
Set	Set	X
X	X	Set

A B C

ABC

C B A

CBA

ABC

Note: The following print modes cannot be mixed on the same line:

♦Standard and compressed pitch

♦Vertical (normal) and rotated

♦Right-side up and upside down

♦Single high (normal) and double high

December 1999 91