Magma P13RR-TEL user manual Remote Monitoring, Getting Started

M A G M A

Chapter 5 Remote Monitoring

The Remote Monitoring System Surveillance Pro 2 adds the ability to remotely monitor the status of the P13RR-TEL. You can now get all the information that is displayed on the LCD of the chassis in near real time without leaving your desk. It is useful for tracking chassis functionality off site applications.

With the prevalence of the Internet almost all computers are now networked together, and the P13RR-TEL has leveraged the existing TCP/IP Ethernet connection as a pathway to the chassis status.

There are two methods to access the status of the P13RR-TEL critical parameters:

The first method is to use an Internet browser. Simply enter the IP address of the Surveillance Pro 2 and the information will be displayed.

The second method is to configure Surveillance Pro 2 to send an email address of your choice. Once configured, Surveillance Pro 2 will alert any problems without user intervention.

In addition, Surveillance Pro 2 is programmed with SNMPv1 (Simple Network Management Protocol). This enables the P13RR-TEL to output the status of its critical parameters to a SNMPv1 manager.

Getting Started

There is a RJ45 Ethernet jack on the rear of the chassis. Simply plug one end of a standard Ethernet cable in the jack and the other end into your network hub, switch, or router.

Chapter 5 Remote Monitoring 17