Operation buttons | Function | |
PRESET +, – | Preset channel selection | |
uio p | Cursor operation | |
ENTER | Enter | |
SEARCH | Direct frequency tuning | |
BAND | FM/AM switching | |
T.MODE | Switch search modes | |
TUNING +, – | Tuning (up/down) | |
0 – 9 | Preset channel selection (1 – 8) / | |
Direct frequency tuning (0 – 9) | ||
| ||
SHIFT | Preset channel block selection | |
MEMORY | Preset memory registration | |
TV POWER | TV power on/standby | |
(Default : Marantz) | ||
| ||
TV INPUT | Switch TV input | |
(Default : Marantz) | ||
|
SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Switching the tuning increment
The tuning increment factory settings are 10kHz for AM, and 0.2 MHz for FM.
MENU
1 While pressing down BAND and MENU, press ON/ STANDBY to turn on the power.
“Step 0 AM10/FM200 1” appears on the display.
“Step 0AM9/FM50 1” appears on the display, and the tuning increment is switched to AM and FM are 9 kHz and 0.05 MHz.
•The tuner preset memory will be cleared if this operation is performed.
•This setting will not revert to the default values even when the microprocessor is reset.
25
Simple version
Basic version
Advanced version
Information