Marantz NR1601 Playback Basic operation, Selecting the input source, Adjusting the master volume

SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH

Playback (Basic operation)

Simple

nn Selecting the input source (vpage 21) nn Adjusting the master volume (vpage 21)

nn Turning off the sound temporarily (vpage 21)

nn Playing a Blu-ray Disc player/DVD player

(vpage 22)

nn Playing a CD player (vpage 22) nn Playing an iPod® (vpage 22)

nn Playing a USB memory device (vpage 23) nn Tuning in radio stations (vpage 24)

Selecting a listening mode (Surround mode)

(vpage 26)

Playback (Advanced operation) (vpage 35)

Important information

Before starting playback, make the connections between the different components and the settings on the receiver.

NOTE

Also refer to the operating instructions of the connected components when playing them.

Selecting the input source

Press the input source select button (BD, DVD, SAT, GAME, AUX1, USB, TV, CD, TUNE, M-XP) twice to play back that source.

The desired input source can be selected directly.

You can also use the following operation to select an input source.

•Select input source “AUX2” to play back music from an audio system connected to the AUX2 input connector.

•Select the input source “AUX2” using one of the following methods. q “Source select ” menu (“Using the “Source Select” menu”

provided on the right)

w INPUT d f on the remote control unit (“Operating the remote control unit” provided on the right)

e INPUT SELECTOR knob on the main unit (“Operating the main unit” provided on the right)

nnUsing the “Source Select” menu

q Press AMP and then press SOURCE SEL. Display the “Source Select” menu.

Source Select

	BD	USB
	DVD	TV
	SAT	CD
	GAME	AUX2
	AUX1	TUNER
		The currently selected input source
		M-XPort
[	]:Source	is highlighted.
[ENT]:Select

w Use uio p to select the input source, then press ENTER.

The input source is set and the source selection menu is turned off.

•When using with an iPod connected directly to the USB port of this unit, select “USB” for the input source.

•Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” (vpage 52).

•To turn off the source selection menu without selecting an input source, press SOURCE SEL again.

nnOperating the remote control unit

Press INPUT d f.

• When INPUT d f is pressed, the input source is switched in the order shown below.

BD DVD SAT GAME AUX1 USB

M-XPort TUNER AUX2 CD TV

nnOperating the main unit

Turn INPUT SELECTOR.

• Turning INPUT SELECTOR switches the input source, as shown below.

BD DVD SAT GAME AUX1 USB

M-XPort TUNER AUX2 CD TV

Adjusting the master volume

Use VOLUME + – to adjust the volume.

nn When the “Volume Display” setting (vpage 52) is “Relative”

GAdjustable rangeH

– – – –80.5dB – 18.0dB

nn When the “Volume Display” setting (vpage 52) is “Absolute”

GAdjustable rangeH 0.0 – 99.0

•The variable range differs according to the input signal and channel level setting.

You can also operate via the main unit. In this case, perform the following

operations.

Turn VOLUME to adjust the volume.

Turning off the sound temporarily

Press MUTE.

• The sound is reduced to the level set at “Mute Level” (vpage 52).

• To cancel, press MUTE again. Muting can also be canceled by adjusting the master volume.

21

version

Basic version

Advanced version

Information