| SVENSKA | NEDERLANDS |
|
|
|
|
| Manual Setup |
|
|
|
Setting items | Setting details |
|
|
| |
USB : Set the USB screen display time when the input source is “USB”. | ||
(Continued) | • Always : Show display continuously. |
|
•30sec : Show display for 30 seconds after operation.
•10sec : Show display for 10 seconds after operation.
•OFF : Turn display off.
| TUNER : Set the tuner screen display time when the input source is |
| “TUNER”. |
| • Always : Show display continuously. |
| • 30sec : Show display for 30 seconds after operation. |
| • 10sec : Show display for 10 seconds after operation. |
| • OFF : Turn display off. |
Display | ON : Display is always on. |
Set the display on/off | Display Auto OFF : Display is off except |
setting. | when showing the status display. |
| Display OFF : Display is always off. |
This can also be set by pressing DISPLAY
on the remote control unit or main unit. Each time DISPLAY is pressed, the setting
is changed as shown below.
| ON | Display Auto Off |
|
| Display OFF |
Setup Lock | ON : Turn protection on. | |
Protect settings from | OFF : Turn protection off. | |
inadvertent change. | When canceling the setting, set “Setup Lock” to “OFF”. | |
| ||
NOTE
When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related settings.
· Menu operations | · Dynamic EQ® |
· | · Dynamic Volume® |
· MultEQ® | · Channel Level |
ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Information
Show information about receiver settings, input signals, etc.
Items | Setting details |
Status | Select Source / Name / Surround Mode / Input Mode / |
Show information about | Decode Mode / Video Select / Video Mode / Content Type etc. |
current settings. | NOTE |
| |
| The information displayed differs according to the input source. |
Audio Input Signal | Surround Mode : The currently set surround mode. |
Show information about | Signal : The input signal type. |
audio input signals. | fs : The input signal’s sampling frequency. |
| Format : The number of channels in the input signal (front, surround, LFE). |
| Offset : The dialogue normalization correction value. |
| Flag : This is displayed when inputting signals including a surround back |
| channel. “MATRIX” is displayed with Dolby Digital EX and |
| signals, “DISCRETE” with |
| Dialogue normalization function |
| This function is automatically activated when |
| playing Dolby Digital sources. |
| It automatically corrects the standard signal |
| level for individual program sources. |
| The correction value can be checked using |
| STATUS. |
| The figure is the corrected |
| value. This cannot be |
| changed. |
HDMI Information | HDMI Signal Information |
Show information about | • Resolution / Color Space / Pixel Depth |
HDMI input/output signals | HDMI Monitor Information |
and monitor. | • Interface / Suport Resolution |
Preset Channel | A / B / C / D / E / F / G |
Show information about | A1 – A8 / B1 – B8 / C1 – C8 / D1 – D8 / E1 – E8 / F1 – F8 / G1 – G8 |
preset channels. |
|
TUNER |
|
Simple version
Basic version
Advanced version
Information
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | 53 |
buttons | (Up/Down/Left/Right) |
| ||
|
|
|
