Marantz NR1601 Front A/B connection, Bi-amp connection, channel connection, English, Connect

ENGLISH

Front A/B connection 2.1-channel/2-channel connection

The second set of front speakers can be connected to the FRONT B/

HEIGHT terminals.

In this case, set “Front Speaker Setup” (vpage 51) of “Speaker

Setup” to “B”.

Connect

Bi-amp connection

A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned force without output) of the woofer sent to the tweeter, which affects the sound quality of the tweeter, and you can enjoy playback with higher-quality sound.

In this case, set “Amp Assign” of “Set up speakers” (vpage 33) to “SPKR-C”.

SW

FL(B) FL(A)

FR(A) FR(B)

FLFR

SW

2-channel connection

For 2-channel playback, disconnect the subwoofers.

q	w	q	w
	FL	FR
	(L)		(R)

For surround playback of a multichannel source, if you connect the center speaker, surround speakers, surround back speakers and subwoofers, 7.1-channel playback is available.

Front speakers can be used separately, depending on the speaker’s specifications or playback source such as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback (vpage 51 “Front Speaker Setup”).

When making a bi-amp connection, the same signal is output from the FRONT A terminal and the SURR.BACK/SPEAKER C terminal.

For surround playback of a multichannel source, if you connect the center speaker, surround speakers and subwoofers, 5.1-channel playback is available.

NOTE

•Use speakers compatible with bi-amp connections.

•When making bi-amp connections, be sure to remove the short- circuiting plate or wire between the speaker’s woofer and tweeter terminals.

32

For speaker impedance and speaker cable connections, see page 4.