ENGLISH
Convenient functions
Sleep timer function
The power automatically goes into standby once the set time has elapsed.
This is convenient for playing sources while going to sleep.
Press SLEEP and display the time you want to set.
The “SLEEP” indicator on the display lights.
• The time switches as shown below each time SLEEP is pressed.
OFF 
10 min 
20 
30 
40 
50
120 
110 
100 
90 
80 
70 
60 
To cancel the sleep timer
Press SLEEP to set “OFF”.
The “SLEEP” indicator on the display turns off.
The sleep timer setting is canceled if this unit’s power is set to standby or turned off.
Adjusting the volume of the speakers
You can adjust the channel level either according to the playback sources or to your taste, as described below.
nnAdjusting the volume of the different speakers
1 Press AMP to set the remote
control unit to amplifier operation mode.
2 Press CH LVL.
|
| Channel Level |
|
|
|
|
|
| |
|
|
| SR | 0.0dB |
|
|
|
|
|
FL | 0.0dB |
|
|
|
|
| |||
| C | 0.0dB | SBR | 0.0dB |
|
|
|
|
|
FR | 0.0dB | SBL | 0.0dB |
|
|
|
|
| |
SW | 0.0dB | SL | 0.0dB |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
nnAdjusting the volume of groups of speakers (Fader function)
This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / center speaker) or rear (surround speaker / surround back speaker).
1 Press AMP to set the remote
control unit to amplifier operation mode.
2 Press CH LVL.
Channel Level
FL 0.0dB SR 0.0dB
C0.0dB SBR 0.0dB
FR | 0.0dB | SBL | 0.0dB |
SW | 0.0dB | SL | 0.0dB |
Fader
FRONT
:
REAR [
]:CH Sel.
3 Use i to select “Fader”, then select the item to be adjusting using o p.
4
•The fader function does not affect the subwoofer.
•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of
36
