MicroNet Technology SP5054, SP5050, SP5052 user manual Commit command, Ifaddr command

Warning: Once users execute flash –clean,all the configurations of VoIP FXO gateway will be cleaned. This can only be executed by user who log in with root

5.6 [commit] command

Save changes after configuring the VoIP FXO gateway.

usr/config$ commit

This may take a few seconds, please wait....

Commit to flash memory ok! usr/config$

Note:

Users should use commit to save modified value, or they will not be activated after system reboot.

5.7 [ifaddr] command

Configure and display VoIP FXO gateway network information.

usr/config$ ifaddr

LAN information and configuration Usage:

ifaddr [-print][-dhcp used][-sntp mode [server]] ifaddr [-ipsharing used [deviceAddr]]

ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]

-print		Display LAN information and configuration.
-ip	Specify VoIP FXO gateway ip address.
-mask		Set Internet subnet mask.
-gate		Specify default gateway ip address
-dhcp		Set DHCP client service flag (On/Off).
-sntp		Set SNTP server mode and specify IP address.
-timezone		Set local timezone.
-cmcenter	Set Management Center IP Address.
-ipsharing		Specify usage of an IP sharing device and specify IP
address.
Note:

Range of ip address setting (0.0.0.0 ~ 255.255.255.255). DHCP client setting value (On=1, Off=0). If DHCP set to 'On', Obtain a set of Internet configuration from DHCP server assigned. SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode).

Example:

ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254 ifaddr -dhcp 1

ifaddr -sntp 1 210.59.163.254 ifaddr -ipsharing 1 210.59.163.254

20