Step 3. Start configure
Most of all commands displayed in console / telnet are transfer to web interface. The most important commands are Network Interface, H323 Information, Commit Data and Reboot System. The method is as the same as command mode.
1.1 Network Interface
zIP Address: Set IP Address
zSubnet Mask: Set the Subnet Mask
zDefault routing gateway: Set Default routing gateway
zDHCP: Enable / Disable to DHCP mode
zSNTP: Enable / Disable the Simple Network Time Protocol
zSNTP Server Address: Set SNTP Server Address
zGMT: Set time zone for SNTP Server time
zIP Sharing: Enable it if behind IP Sharing router
zIP Sharing Server Address: Set WAN IP Address of IP Sharing Server router if it is a fixed one.
Note:
If the WAN IP Address of IP Sharing Server router is not a fixed one, it is not necessary to input any values.
If it is behind the dynamic WAN IP Address situation please configure as GK mode and select Micronet Call Manager as proxy server.
47
