MicroNet Technology SP5052, SP5050, SP5054 Display voice codec information and configuration

usr/config$ voice

Voice codec setting information and configuration Usage:

voice [-send [G723 ms] [G711A ms] [G711U ms] [G729A ms] ] [-volume [voice level] [input level] [dtmf level]] [-nscng G723 used] [-echo used] [-mindelay t1] [-maxdelay t2] [-optfactor f]

voice -print

voice -priority [G723] [G711A] [G711U] [G729A]

-print	Display voice codec information and configuration.
-send	Specify sending packet size.
	G.723	(30/60 ms)
	G.711A (20/40/60 ms)
	G.711U (20/40/60 ms)
	G.729A (20/40/60 ms)
-priority	Priority preference of installed codecs.
	G.723
	G.711A
	G.711U
	G.729A
-volume	Specify the following levels:
	voice volume (0~63, default: 28),
	input gain (0~63, default: 28),
	dtmf	volume (0~31, default: 23),

-nscng	No sound compression and CNG. (G.723.1 only, On=1, Off=0).
-echo	Setting of echo canceller. (On=1, Off=0, per port basis).
-mindelay		Setting of jitter buffer min delay. (0~150, default: 100).
-maxdelay		Setting of jitter buffer max delay. (0~150, default: 150).

Example:

voice -send g723 60 g711a 60 g711u 60 g729a 60 voice -volume voice 20 input 32 dtmf 27

voice -echo 1 1

Parameters Usage:

-print	print current voice information and configurations.
-send	to define packet size for each codec. 20/40/60ms means to send
	a voice packet per 20/40/60 milliseconds. The smaller the
	packet size, the shorter the delay time. If network is in good
	condition, smaller packet size is recommended. In this
	parameter, 20/40/60ms is applicable to G.711u/a law, and
	G.729a codec, while 30/60ms is applicable to G.723.1 codec.
-priority	codec priority while negotiating with other h323 device. This
	parameter determines the listed sequence in h.245 TCS
	message. The codec listed in left side has the highest priority
	when both parties determining final codec.
-volume	There are three adjustable value. Voice volume stands for
	volume which can be heard from VoIP FXO gateway side. Input
	gain stands for volume which the opposite party hears. Dtmf
	volume stands for DTMF volume/level which sends to its own
	Line1 or Line2.

34