MicroNet Technology SP5050, SP5052, SP5054 user manual Passwd command

	asking for pincode.
-s	to specify TFTP server’s IP address when upgrading ROM files.
-f	to specify the target file name, which will replace the old one.
-method	to decide using TFTP or FTP as file transfer server. “0” stands
	for TFTP, while “1” stands for FTP.
-ftp	if users choose FTP in above item, it is necessary to specify
	pre-defined username and password when upgrading files.

5.24 [passwd] command

For security concern, users have to input the password before entering configuration mode.

usr/config$ passwd

Password setting information and configuration Usage:

passwd -set Loginname Password Note:

Loginname can be only 'root' or 'administrator' Example:

passwd -set root 2fxo

Parameter Usages:

-passwd <login name> <password>

Note:

<login name> can be “root” or “administrator” only. “root” and “administrator” have the same authorization, except3 commands that can be executed by “root” only – “passwd –set root”, “rom –boot”, and “flash –clean”

42