MicroNet Technology SP5050, SP5052 14 h323 command, Usr/config$ sysconf -sendxcode 1 -access set1

	for response. If the other party cannot respond the message in
	10 seconds, VoIP FXO gateway will regard the opposite party as
	IDLE state and disconnect the call. When CallAlive is
	deactivated, RoundTripDelay message will not be sent during
	connection.
- keypad	keypad type when relay DTMF signal.
	0	: In-Band
	1	: h.245 alphanumeric
	2	: h.245 signal type
	3	: q.931 user info
- pincode	To specify 2 sets of pincode.
-sendxcode	send access code after connection (1 = ON; 0 = OFF)
-access	specify access codes (per port basis).

Note:

1.This feature can only be implemented with LineToLine service. Please refer to –service above.

2.This function can help users to restrict callers to dial particular numbers from IP side to PSTN side. For example, if user set sysconf –access set1 1111, when callers call from IP side and enter VoIP FXO gateway port 1, if user dial 234 after hearing dial tone, VoIP will dial out 1111234.

usr/config$ sysconf –sendxcode 1 –access set1 1111

5.14 [h323] command

This command is to configure H.323 related parameters.

usr/config$ h323

H.323 stack information and configuration Usage:

h323

h323 [-gk ipaddress] [-multicast used] [-e164 number] [-alias h323id] [-rtp port] [-h245 port] [-ttl time] [-gkfind port] [-ras port]

[-range [start num1] [end num2]]

h323 -print
-print	Display H.323 stack information and configuration.
-mode	Configure as Gatekeeper mode or Peer-to-Peer mode.
-gk	Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255)
-gkname	Gatekeeper ID
-dfgw	Default Gateway ip address. (0.0.0.0 ~ 255.255.255.255)
-e164	IP side registered number (phone number).
-alias	IP side registered H.323 alias (account name).
-gkdis	Gatekeeper auto discovery (On=1, Off=0).
-rtp	RTP port number (1024~65532).
-h245	H.245 port number (N/A).
-ttl	RAS TTL time (0~3600 second).
-gkfind	Gatekeeper finding port (1024~65535).

30