Installation
Position and secure the machine
To ensure stability the machine must first be aligned and then screwed to the worktop.
Open the door. Through each of the two holes in the front rim, left and right, screw the machine to the front edge of the continuous worktop.
Do not use silicone sealant to seal the gaps between the machine and any neighbouring units as this would hinder ventilation of the circulation pump.
Depending on the requirements for building under, the following kit can be ordered from the Miele Spare Parts Department:
Coverplate (protects the worktop)
The underside of the worktop is protected from water ingress by a
Decor frame fitting kit
The machine front can be fitted with a decor panel to match kitchen units. The decor frame is supplied with its own fitting instructions.
45
