Cleaning and care
Cleaning the spray arms
Waste particles can lodge in the spray arm jets.
The spray arms should be inspected and cleaned regularly (approx. every 6 months).
Use a sharp pointed object to push particles into the spray arm jets and rinse well under running water.
Remove the spray arms as follows:
Unscrew the upper spray arm.
Remove the middle spray arm (on the top basket) by unscrewing the knurled nut.
Important:
The knurled nut has a
Take off the lower spray arm.
The lower basket must be removed first.
Particles in the lower spray arm are easier to rinse out if the cap is first opened.
Open the cap in the direction of the arrow. After cleaning, close up the cap again.
Important:
After replacing the spray arms, check that they move freely.
39