Programming special functions
3.Delay start and setting the delay start time
The start of a wash programme can be delayed by up to 9 hours and 30 minutes in 30 minute stages.
Note:
Delay start should only be selected with the Universal and Intensive pro- grammes. Items in the machine stand for a longer period before being cleaned and residues can dry on if the start time is delayed. Delaying the start time in shorter programmes can impair cleaning results.
a) To activate delay start
Turn the programme selector to the f “STOP” position.
Switch off the machine.
Press 4 and 6 at the same time, hold them in and whilst doing so switch the machine on with the
The current programme status “P...” appears in the display.
The p / 6 indicator light comes on.
Press 3 once, “E01” (programming level 1) appears in the display.
Turn the programme selector to the 8 o’clock position.
“80” or “81” appears in the display. “80” = Delay start not selected. “81” = Delay start activated.
Press 4 to change from “80” to “81” or vice versa.
Press 6. “SP” appears in the display.
Press 6 again. The change has been recorded.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes to 9 hours and 30 minutes) must be set before a programme is started.
After selecting a programme (see
“Switching on”), press the 4 button or hold it in until the required value is displayed. The “Delay Start” indica- tor light comes on.
After the “Start” button 6 is pressed, the delay start period will count down in the display until the programme auto- matically starts.
34
