Switching the machine on and off
Switching on
Close the door.
Open the stopcocks (if turned off) .
Press the
When the programme selector is at the
f“STOP” position a point lights up in the display field.
Starting the programme
Turn the programme selector clock- wise or
The wash temperature of the se- lected programme is shown in the display field, except with D (COLD) and 6 (DRAIN).
Select additional function 3 (DRYING) if required, (see “Select- ing an additional function”).
Press the 6 “Start” button. The dis- play field will now show the actual temperature.
The indicator light next to the “Start” button comes on.
Once the programme has started, all other programmes are blocked. If the programme selector is then turned to another programme, the values shown in the display field go out. The values can be seen again only if the pro- gramme selector is turned back to the position of the programme currently in operation.
Press the 4 button to alternate the display between elapsed time and actual temperature.
Note that during the
30