Programming special functions
5.Altering the wash temperature and/or the temperature holding time in the “Main wash” and “Final rinse” programme stages
In the event of a service
Factory settings for the main wash tem- perature and temperature holding times and for the final rinse tempera- ture and its holding time are given in the programme chart.
The main wash and final rinse tempera- tures can be set from 30°C - 70°C and the temperature holding time from 1 to 10 minutes.
Turn the programme selector to the
f“STOP” position (the programm- ing level is displayed only in this switch position).
Switch off the machine.
Press 4 and 6 at the same time, hold them in and whilst doing so switch the machine on with the
The current programme status “P...” appears in the display.
The p / 6 indicator light comes on.
“Main wash” temperature:
Press 3 three times, “E03” (pro- gramming level 3) appears in the dis- play.
Turn the programme selector to the programme which needs to be changed. The actual value appears in the display after °C.
Press 4 or hold it in, until the re- quired value appears in the display.
“Main wash” temperature holding time:
Turn the programme selector to the
f“STOP” position (the programm- ing level is only displayed in this switch position).
Press 3 again, “E04” (programm- ing level 4) appears in the display. Then:
Turn the programme selector back to the programme which needs to be changed. The actual value appears in the display after min.
Press 4 until the required value ap- pears in the display.
“Final rinse” temperature:
Turn the programme selector to the
f“STOP” position (the programm- ing level is displayed only in this switch position).
Press 3 again, “E05” (programm- ing level 5) appears in the display. Then:
36
