DATA MEMORY

Turn the rear control dial one click to view more information about the frame. The display will change as follows:

Shutter speed

 

 

Aperture

Flash ON/OFF

Exposure compensation ON/OFF

Flash compensation ON/OFF

 

 

Frame number

 

Bracketing ON/OFF

Focal length

 

 

Flash/Exposure compensation value*

Flash ON/OFF

Exposure compensation

Flash compensation ON/OFF

 

 

Frame number

 

Bracketing ON/OFF

*If flash compensation was used, exposure compensation and flash compensation will alternate blinking in the data panel.

Turn the front control dial to change frames.

• Repeat step 5 to view information about the displayed frame.

110

Press the adjust button again to return to the data-memory ON/OFF/READ screen.

• Repeat steps 2 through 6 to view

information in other data areas.

• To exit the data-memory screen,

turn either dial until either or

appears, then press the shutter-release button partway down to enter the setting.

DELETING ALL OF THE STORED DATA

Press and hold the data- memory button in the control panel.

Press the adjust button.

will appear and will blink in the data panel.

• Release both buttons.

Press the data-memory button again.

will blink while the data is being deleted.

• The stored data will be completely deleted. The data panel will return to the standard display.

This will delete the data in all of the film areas. It is not possible to select a specific film area to clear.

Do not operate the camera while blinks in the data panel.

111

Page 57
Image 57
Minolta 800si instruction manual Turn the front control dial to change frames, Deleting ALL of the Stored Data