DATA MEMORY

SELECTING DATA MEMORY

Press the data-memory button in the control panel.

Turn either control dial until appears in the data panel.

• The film area where the data is to be stored will appear in the bottom right corner.

Press the shutter-release button partway down to enter the selection.

will appear in the data panel when data-memory is on.

Turn data memory OFF using the steps above, turn either control dial

until appears in the data panel in step 2.

CONFIRMING THE DATA AREA

Press the data-memory button at anytime to see in which data area information is being recorded.

Example: F3 indicates you are now recording in film area 3.

108

DATA RECALL

Press the data-memory button in the control panel.

Turn either control dial until

appears in the data panel.

Continue turning the dial until the number for the desired data area appears.

Press the adjust button.

• The display in the data panel shows the aperture and shutter speed information for the first frame.

blinks in the data panel.

Continued on next page.

109

Page 56
Image 56
Minolta 800si instruction manual Selecting Data Memory, Confirming the Data Area, Data Recall, Press the adjust button