Remote Operation Software (DX-PC For View)
Appendix A ─ Reviewing Video Clips
You do not need to install any special software on you personal computer to review video saved as
NOTE: It is suggested that the computer used for the Clip Player program has at least an 800MHz Pentium III (Intel Pentium Dual Core 2.2GHz recommended). If your CPU is slower than this, video clips recorded at maximum speed with very high image quality will be played back slowly. Also DirectX
9.0or higher is required to install, and the VGA card with 16MB or higher video RAM is recommended for proper operation.
NOTE: You will be asked to enter the password to initiate the Clip Player program if you select Save Password option when saving recorded video.
The ClipPlayer Screen displays the clip images.
NOTE: Proper image display depends on the display settings of your PC. If you are experiencing display problems, click the right mouse button on the background screen and select Properties → Settings then set the Color quality to “32 bit”. Then select Advanced → Troubleshoot, and then set the Hardware Acceleration to “Full”. Please make sure that DirectX version 9.0 or higher has been installed if the display problem continues. To check the version of DirectX, click Start → RUN and type “dxdiag” then hit the enter key which will display DirectX Diagnostic Tool dialog box. Then move to the Display tab and make sure DirectDraw Acceleration is set to “Enabled”. Test DirectDraw by selecting the DirectDraw Test button. Please check the driver version of the video card and update it to the latest version available. If you still have display problems after changing all display settings as described above, try replacing the video card. Video cards with an ATI chipset are recommended.
Clicking 
exits the Player program.
Click 
to go to the beginning of the video clip.
Click 
to play the video clip in fast reverse.
Click 
to go back one frame of the video clip.
Click 
to play the video clip.
45
