Mitsubishi Electronics FR-A500L instruction manual R a M E T E R S

P A R A M E T E R S

Func-		Parameter			Minimum		Refer To
			Name	Setting Range	Setting	Factory Setting	Page:
tion		Number
					Increments		<Note9>
flexiblepoint-5V/F	characteristics	107	V/F4 (fourth frequency voltage)	0 to 1000V	0.1V	0	98
			(Note 1)
			(Note 1)
		108	V/F5 (fifth frequency) (Note 1)	0 to 400Hz, 9999	0.01Hz	9999	98
		109	V/F5 (fifth frequency voltage)	0 to 1000V	0.1V	0	98
		110	Third acceleration/deceleration time	0 to 3600 sec/	0.1 sec/	9999	99
				0 to 360 sec, 9999	0.01 sec
functions		111	Third deceleration time	0 to 3600 sec/	0.1 sec/	9999	99
				0 to 360 sec, 9999	0.01 sec
		112	Third torque boost (Note 1)	0 to 30.0%, 9999	0.1%	9999	99
Third		113	Third V/F (base frequency) (Note 1)	0 to 400Hz, 9999	0.01Hz	9999	99
		*114	Third stall prevention operation current	0 to 150%	0.1%	150%	99
		115	Third stall prevention operation	0 to 400Hz	0.01Hz	0	99
			frequency
		116	Third output frequency detection	0 to 400Hz, 9999	0.01Hz	9999	99
functions		117	Station number	0 to 31	1	0	99
		118	Communication speed	48, 96, 192	1	192	99
		119	Stop bit length/data length	0, 1 (data length 8)	1	1	99
				10, 11 (data length 7)
Communication
		120	Parity check presence/absence	0, 1, 2	1	2	99
		121	Number of communication retries	0 to 10, 9999	1	1	99
		122	Communication check time interval	0, 0.1 to 999.8 sec,	0.1	0<9999>	99
				9999
		123	Waiting time setting	0 to 150ms, 9999	10ms	9999	99
		124	CR, LF presence/absence selection	0,1,2	1	1	99
		128	PID action selection	10, 11, 20, 21	1	10	109
control		129	PID proportional band	0.1 to 1000%, 9999	0.1%	100%	109
		131	Upper limit	0 to 100%, 9999	0.1%	9999	109
		130	PID integral time	0.1 to 3600 sec, 9999	0.1 sec	1 sec	109
PID
		132	Lower limit	0 to 100%, 9999	0.1%	9999	109
		133	PID action set point for PU operation	0 to 100%	0.01%	0%	109
		134	PID differential time	0.01 to 10.00 sec, 9999	0.01 sec	9999	109
-			Commercial power supply-inverter
supply	over	135	switch-over sequence output terminal	0, 1, 2	1	0	116
			selection
powerCommercial	switchinverter-	136	MC switch-over interlock time	0 to 100.0 sec	0.1 sec	1.0 sec	116
		137	Start waiting time	0 to 100.0 sec	0.1 sec	0.5 sec	116
			Commercial power supply-inverter
		138	switch-over selection at alarm	0, 1	1	0	116
			occurrence
		139	Automatic inverter-commercial power	0 to 60.00Hz, 9999	0.01Hz	9999	116
			supply switch-over frequency
		140	Backlash acceleration stopping	0 to 400Hz	0.01Hz	1.00Hz	119
			frequency (Note 7)
Backlash		142	Backlash acceleration stopping time	0 to 400Hz	0.01Hz	1.00Hz	119
		141	(Note 7)	0 to 360 sec	0.1 sec	0.5 sec	119
			Backlash deceleration stopping
			frequency (Note 7)
		143	Backlash deceleration stopping time	0 to 360 sec	0.1 sec	0.5 sec	119
			(Note 7)
Display		144	Speed setting switch-over	0, 2, 4, 6, 8, 10, 102,	1	4	119
				104, 106, 108, 110
Additional	functions	*148	Stall prevention level at 0V input	0 to 150%	0.1%	120%	58
		*149	Stall prevention level at 10V input	0 to 150%	0.1%	150%	58

20