PROTECTIVE FUNCTIONS
●To know the operating status at the occurrence of alarm
When any alarm has occurred, the display automatically switches to the indication of the corresponding protective function (error). By pressing the [MODE] key at this point without resetting the inverter, the display shows the output frequency. In this way, it is possible to know the running frequency at the occurrence of the alarm. It is also possible to know the current in the same manner. However, these values are not stored in memory and are erased when the inverter is reset.
5.1.2 Correspondences between digital and actual characters
There are the following correspondences between the actual alphanumeric characters and the digital characters displayed on the operation panel:
Actual Digital
Actual Digital
Actual Digital
0
A
M
1
B
N
2
C
O
3
E
o
4
F
P
5
G
T
6
H
U
7
I
V
8
J
r
9
L
-
28
