EN-11
4. Projector registration
Procedure B - Connection example 3 (where pr ojectors are installed via a router)
To automatically detect projectors connected via a router, confirm the IP address in the projector network me nu
and specify a range of IP addresses to search that pa rticular IP address using “Search Projector Setting”.
<Note>
If you want to connect a projector via a router after automatically detecting it, you nee d to specify a search range
of IP addresses that includes the projector's IP address in advance.

(1) Start up “ProjectorView Global+”.

(2) Select “Search Projector Setting” from “Con figuration” of the menu bar.

• “SearchProjectorSetting”windowisdisplayed.
 
Item Description
Start IP Address Specify the IP address that is the start of the se arch range.
  (YoucannotspecifyanIPaddressthatcontainsarangeotherthan1to254for
the first and last octets and a range other than 0 to 255 for the second and third
octets.)
 EndIPAddress SpecifythelastoctetoftheIPaddressthatistheendofthesea rchrange.(You
cannot specify a value that contains a number other than 1 to 254. In addition,
you cannot specify a value that is smaller than the last octet of the sea rch start IP
address specified in step .)
Search Projector The settings you made are saved and then the automatic projector search is
performed.

(3) Specify the projector search range by IP add ress ( and ).

• Upto16searchrangescanbeset.(Settingscanbeconguredforeachlineofthese archrange.)

(4) To save the settings, click [Save]. To continue the p rojector search, click [Search Projector].

• Whenyouclick[Save],thesearchrangesyouspecifyaresavedandthe“SearchProje ctorSetting”window
is closed.
• Whenyoudon'twanttosavethesearchranges,click[Cancel]toclosethe“SearchProjectorSet ting”
window.
• Aftersavingthesettings,byselecting“Conguration”onthemenubaran dthenselecting“Search
Projector”, you can perform automatic projector search within the search range s you saved.
• Someprojectorsmayrequireyoutoenterthepasswordwhenestablishingproje ctorconnectionsforthe
first time. Authentication is automatically performe d from the second time onwards unless projectors are
deleted from the list.