EN-20
8. ProjectorView
ProjectorView is a web-browser based remote control and monitoring tool for n etwork projectors. If you use the
projectors listed in page 32, see ProjectorView in “LAN Contr ol Utility” User Manual included with the projector.
<Note>
• WhenCRESTRONisselectedwiththenetworkmenu,itbecomesth eWebcontrolforCRESTRON.

8.1. Main functions

• Itdisplaysthestatusofnetworkprojectors(suchasthenameoftheprojector,lamptemperature,lamphou rs,
errors and alerts).
• Itcontrolsnetworkprojectors(suchaspoweringonandoffnet workprojectorsandswitchinginputorlamp
modes).
• ItsendsanE-mailnoticationwhenanerrororwarningoccur s.

8.2. Starting ProjectorView

(1) Select the projector that you want to operate from th e list of projectors on the main screen.

• StartProjectorViewforoneprojectoratatime.YoucannotconcurrentlyuseProjec torViewformultiple
projectors.

(2) Click [ProjectorView] in the tool bar on the main screen.

• TheWebbrowserlaunchesautomatically.Thepasswordentrywindowisthendisplayed.
<Note>
• YoucanstartProjectorViewbymanuallytypingtheprojectorIPaddressinyourwebbr owser’saddress
bar.
• Ifyouareusingaproxyserver,donotenableproxysettingswhenaccessin gtheprojectorIPaddress.
• UptothreeProjectorViewunitscanbeusedtocontrolasingleprojector.

(3) Enter the password and click [OK]. (The default pa ssword is “admin”.)

• “ProjectorView”mainwindowisdisplayed.
<Note>
• Theconnectionwillturnoffinveminutesafterthepasswordentr ywindowisdisplayed.Youcannotenter
the password then. If this happens, restart the ProjectorVi ew.