EN-14
5. Operation of projector

5.1. Operation of projector by remote controlle r

Group or single unit of projector can be operated.

(1) Select the projector which you like to operate from the p rojector list on the main screen.

• Whenselectingmorethanoneprojectorsimultaneous ly,selectwhilepressingtheCtrlkey.

(2) Click [Remote Controller] of the tool bar on the main scree n or when you like to operate a

certain projector, double cli ck the projector on the projector list on the m ain screen.

• “RemoteController”windowisdisplayed.

(3) Operate the projector by selecting each opera ting button on the window.

Command Button Description
Power Power ON Turn on the power supply of the projector.
Power OFF Turn off the power supply of the projector.
Input Source COMPUTER 1 Change the input signal to COMPUTER 1.
COMPUTER 2 Change the input signal to COMPUTER 2.
VIDEO Change the input signal to VIDEO.
S-VIDEO Change the input signal to S-VIDEO.
HDMI *1 Change the input signal to HDMI *1.
DVI-D *1 Change the input signa l to DVI-D *1.
DIGITAL 3 Change the input signal to DIGITAL 3.
NETWORK Chan ge the input signal to NETWORK.
STORAGE 1 Chang e the input signal to STORAGE 1.
STORAGE 2 Chang e the input signal to STORAGE 2.
COMPONENT Change the input signal to COMPONENT.
Exit  ClosetheRemoteControllerwindow.
*1 HDMI a nd DVI-D are displayed with DIGITAL 1 or DIGITAL 2 by a connected projector.
<Note>
• Thenextoperationcannotbeperformeduntilthep reviousoperationhasbeencompleted.
• Theoperationcannotbeperformedduringre -obtaining(refreshing)theprojectorstatus.
• Availableinputsourcesvarydependingonthetypeofprojec tors.Youcannotselectinputsourcesthataren’t
supported by the projector.