EN-21
8. ProjectorView
<Note>
• Iflampmodeissetto“STANDARD”,“Lamptime”displayedmaybelongerthan“Operationtime”.
Projec torView main window (REMOTE CONTROL)WhenyouclickREMOTECONTROL,theRemoteControlwindowisdisplayed.Youcanclickthebuttons
displayedinthewindowtoremotelycontroltheprojector.Buttonswithredtextshowtheprojector’scurrent
status.Thestatusdisplayedinthiswindowisupdatedinregularintervals.Youcanalsomanuallyupdatethe
status by clicking GET STATUS.
Click [REMOTE CONTROL] to
display the window on the left.
Click [PROJECTOR INFORMATION]
to display the main window
(PROJECTOR INFORMATION).
Click [ALERT E-MAIL] to display the
main window (ALERT E-MAIL).
Click to obtain the status of the
projector. The window is updated
simultaneously.
<Note>
It may take time to update the
window.
These are virtual remote control
buttons.
For details, see the description of
theremotecontrolbutton/keyin
User Manual.
These buttons are used to control the projector’s power, input source, and lamp mode.
The number of input switches that can be displayed vary depending on the t ype of projector you use.
See your projector User Manual for more information.
Lamp mode cannot be switched when the projector is muted.
Projec torView main window (PROJECTOR INFORMATION)When you click PROJECTOR INFORMATION, the Projector Information window is displayed. To display the
information, enter data in the Setup window.
Click [PROJECTOR INFORMATION]
to display the window on the left.
Click [REMOTE CONTROL] to
display the main window (REMOTE
CONTROL).
Click [ALERT E-MAIL] to display the
main window (ALERT E-MAIL).
Click [SETUP] to display the Setup
window. (See page 23.)
If there is something wrong with the
projector, the red warning indicator
lights.
Details are displayed in the column
below by pointing the cursor to the
contents of failures.
“Filter change advice” works only
onWL7200U/XL7100U/UL7400U.
<Note>
See your projector User Manual for
the information on when you should
replace the lamp.