EN-24
8. ProjectorView
8.4. Setting the network password
(1) Click [PASSWORD] in the Setup window.
• Thewindowappearstoenterthecurrentnetworkpassword.
(2) Enter the current network password and click [OK]. ( The default is "admin".)
• Ifthepasswordiscorrect,anotherwindowappearstoenteranewone.
• Ifthepasswordiswrong,anerrormessageisdisplayed.Whenyouclick[OK ],thecurrentnetwork
password window reappears.
(3) Enter the New network password and Confirm network pas sword, and then click [OK].
• Ifpasswordsenteredmatch,thewindowclosestosavethechanges.
• Ifpasswordsentereddonotmatch,anerrormessageisdisplayed.Whenyouclick[OK ],thenewnetwork
password window reappears.
8.5. Resetting the network sett ings
When you reset the network settings, all data and setting s specified in 8.3. Entering projector information will be
reverted to factory defaults. Each field will go blank, Aler t e-mail service will be set to OFF, Language to English,
CerticationsettingtoON,andPasswordsettingto"admin".
(1) Click [RESET] in the Setup window.
• Thewindowappearstoresetthenetworksettings.
(2) Click [OK] to revert the network settings to factor y defaults.
• Ifyouclick[CANCEL],thewindowcloseswithoutresetofthenetworksettings.