EN-9
4. Projector registration

4.1. Connection

Connect the controller PC and the projector, which have installed “ProjectorView Global+”, to a commercially
available LAN cable.
When connecting multiple projectors, use a commerc ially available hub.
• ALANterminalisrequiredforthecontrollerPC.
• UseaLANcablecompatiblewithCategory5and100BASE-T.
 UseacrossoverLANcableinthecaseofconnectionexamp le1anduseastraight-throughLANcableinthe���
caseofconnectionexample2.
 (Inthecaseofconnectionexample3,seetheinstructionmanualofthero uter.)
• DonottouchmetalpartsoftheLANterminalandL ANcablebyhandschargedofstaticelectrici ty.Discharge
of static electricity may cause a failure of the projector.
• Upto200unitsoftheprojectorscanberegisteredatthemaximum.
<Note>
• TheLANfunctionmaybeunavailabledependingonthestan dbymodesettingoftheprojector.Toenablethe
LAN function, change the setting referring to the Use r Manual of your projector.

Connection example 1

Controller PC
Projector
Commercially available LAN cable
(Crossover cable)
Projector
Projector

Connection example 2

Controller PC

Connection example 3

Controller PC
Externalhub
Projector
Externalhub
Externalhub
Router
(Straight-through cable)
Commercially available LAN cable