Mitsubishi Electronics UL7400U, WL7050U, WL7200U, XL7000U, XL7100U 8.6. Alert E-mail setting

EN-25

8. ProjectorView

8.6. Alert E-mail setting

8.6.1. Alert E-mail function

When there is something wrong with the projector, an E-mail is automatically sent to the designated addre ss to

notify the error status.

To use this function, it is necessary to change the settings in the Aler t E-mail Setup window appropriately.

<Note>

Once you have conﬁgured the above settings, the E-mail function remains enable d even after you close the web

browser(ProjectorView).Furthermore,whenyousetCONTROLSYSTEMintheNETWORKmenutoCRESTRO N,

the ProjectorView becomes disabled, however, the alert E-mail function remains e nabled.

An example: Sending an alert messag e when the lamp change required.

ProjectorView Alert:

Thelamphasreachedthemaximumusagetime.

Replace the lamp and reset the lamp counter.

Please see the user manual for detailed instruction s.

Projector name : abc

Projectormodel:XY1234

Serial number : 12345

Installeddate:2008/01/01

Installed location : 10Factory-5F

Operation time : 2146 hours, 43 minutes

Lamp time : 4000 hours, 0 minutes

Lastlampreplaceddate:2008/01/01

Lastmaintenancedate:2008/01/01

“Projector model” varies depending on the type of projec tors.

Contents

Main LAN Control Utility User Manual (for WL7200U/XL7100U/UL7400U/WL7050U/XL7000U) Contents 1. Introduction 1.1. Preparing to use network featu res 1.2. Functions and features ProjectorView Global+ ProjectorView 1. Introduction 2. Setup 2.1. Installation of ProjectorView Global+ 2. Setup 2.2. When deleting ProjectorView Global+ (Uninstalla tion) 3. Main screen Page 3. Main screen 3.1. System settings 4. Projector registration 4.1. Connection Connection example 1 Connection example 2 Connection example 3 4.2. Registration of projector to ProjectorVi ew Global+ Procedure B - Connection example 3 (where pr ojectors are installed via a router) (3) Specify the projector search range by IP add ress ( and ). (4) To save the settings, click [Save]. To continue the p rojector search, click [Search Projector]. 4.3. When changing the projector IP set tings 4.4. When changing projector setti ngs 4.5. When deleting projector registr ation 5. Operation of projector 5.1. Operation of projector by remote controlle r (1) Select the projector which you like to operate from the p rojector list on the main screen. (3) Operate the projector by selecting each opera ting button on the window. 5. Operation of projector 5.2. Conrmation of projector status 6. Schedule setting 6.1. Creation of projector group 6. Schedule setting 6.2. When changing schedule set ting 6. Schedule setting 6.3. When deleting group 7. E-mail setting 7.1. Connection with E-mai l server 7.2. E-mail setting (1) Select Edit E-mail Setting from Congur ation of the menu bar on the main screen . (2) Input the setting item for the network enviro nment, and click [Save]. 8. ProjectorView 8.1. Main functions 8.2. Starting ProjectorView (1) Select the projector that you want to operate from th e list of projectors on the main screen. (2) Click [ProjectorView] in the tool bar on the main screen. Projec torView main window (REMOTE CONTROL) Projec torView main window (PROJECTOR INFORMATION) Projec torView main window (ALERT E-MAIL) 8.3. Entering projector information (1) Click [SETUP] in the ProjectorView main window (PROJECTOR INFORMATION). 8.4. Setting the network password 8.5. Resetting the network sett ings 8.6. Alert E-mail setting 8.6.1. Alert E-mail function An example: Sending an alert messag e when the lamp change required. 8.6.2. E-mail setting (1) Click [SETUP] button in the ProjectorView main wi ndow (ALERT E-MAIL). (2) Set each item referring to the explanation descr ibed below. Page 9. Visual PA2 (Visual PA2 enabled projectors only) 9.1. Starting Visual PA2 (1) Click [Visual PA2] in the tool bar on the main scre en. (2) Specify Text, Frame, Location, and Text Speech, enter text, an d then click [Send]. (3) Click [Stop] to stop displaying the message on the proje ctor screen. Page 9. Visual PA2 (Visual PA2 enabled projectors only) 9.5. Conguring the Schedule func tion of Visual PA2 (1) Click [Edit] in the Schedule area. (2) Congure settings ( through ) and check/uncheck th e checkboxes for . (3) Click [Exit] to close the window. 10. Telnet setup (Telnet enabled projectors only) 11. Others 11.1. Troubleshooting Theprojectorcannotberecogni zed. Operationbytheremotecon trollercannotbeproperl yperformed. Applicationbecomes Noreply.