Motorola E360 manual WAP Setting, Primary IP Port, 126

Using Your Phone’s Menus

8Scroll to Line Type and press + (Select).

9Scroll to and select either Analog or ISDN.

10Scroll to Transfer Rate and press + (Select).

11Scroll to and select either Automatic or 9600.

12Press - (Back) to return to the Bearer Type screen.

WAP Setting

This option allows you to set up the IP address of the gateway (proxy server) through which you will access the mobile Internet. Once you have selected the WAP setting, you will have to enter the following information (provided by your service provider):

Primary IP

Primary

Port

The IP address of the gateway (proxy server) you will use to access the mobile Internet. Press and hold - (Delete) to clear the field, and enter the IP address provided by your ISP. The IP address is in the format 123.123.123.123. After entering the address, press + (OK) to return to the previous screen.

The primary port, provided by your service provider. Press and hold - (Delete) to clear the field, enter the port number (from 1024 to 65535) provided by your service provider, then press + (OK) to return to the previous screen.

126