Checking Capacity
To see how many numbers are stored in Contacts:
1From the Contacts list, press m.
2Select Capacity.
Creating Pauses and Waits
When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further.
This feature is useful when using voice mail or other automated phone systems that require you to dial a phone number and then enter an access number.
To program a pause:
Press and hold * until the letter P appears. The P represents a
If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits.
If you want a pause longer than 3 seconds, press and hold * more than once. Each P represents a
Checking Capacity
To program a wait:
Press and hold * until the letter W appears. The W means your phone waits before dialing further.
If you store 17035551235W1234, when you select this number and make a call, your phone dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while dialing a number from the keypad. See “Creating Pauses and Waits While Dialing” on page 52.
International Numbers
Note: This feature may not be offered by your service provider.
When storing a number that you plan to use for international calls, use Plus Dialing:
1Press and hold 0 for two seconds. A “0” appears, then changes to a “+”.
Note: The network translates the “+” into the appropriate international access code needed to place the call.
2Enter the country code, city code or area code, and phone number.
44
