Motorola iDEN Keypad Lock, Setting the Ringer Volume, Selecting a Ring Style, Making Phone Calls

Making Phone Calls

6.Select ÒExitÓ to return to the Vibrate Alert menu.

7.Select ÒExitÓ again to return to the previous mode.

Group/Prvt

Vibe:Off

Exit On

Keypad Lock

On your i2000 phone you may lock your keypad in Phone Mode so inadvertent key presses will not result in digits being dialed or a phone call

being placed. When in Phone Mode, pressing and simultaneously will activate the Keypad Lock. While the keypad is locked,

the only keys that may be pressed are to turn off your phone, or the

followed by to turn off the keypad lock. The keypad lock will be automatically suspended if the i2000 phone receives a Phone, Private, or Group call. At the end of the call, the keypad lock will be automatically re- activated.

N O T E : Emergency Calls cannot be placed while the keypad lock is active.

Setting the Ringer Volume

You can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume.

1.From the Phone Ready screen, press until you see the ÒPrgmÓ menu option.

2.Select ÒPrgmÓ

3. Press	,	. The Ò30=Ringer
VolumeÓ screen displays.
			30=Ringer
The display shows your current ringer			Volume
volume.
			Exit

4.Press the Volume Control buttons on the side of the phone to listen as you raise or lower the volume. At the lowest setting, the screen displays ÒVolume SilentÓ.

5.When you reach the desired level, select ÒExitÓ.

Selecting a Ring Style

Your phone has nine selectable ring styles. Phones with two phone lines can use the same or different ring styles for each phone line.