Motorola iDEN Desktop Dual-Pocket Charger, Vehicular Battery Charger Operating SpeciÞcations

Models: iDEN

1 93
Download 93 pages 44.36 Kb
Page 67
Image 67
Vehicular Battery Charger Operating SpeciÞcations

Accessories

3. Pull the accessory connector from the bottom of the i2000 phone.

Vehicular Battery Charger Operating SpeciÞcations

Operating voltage range: 10.8 - 33.0 Vdc.

Operating temperature range: -30¡C to +60¡C

Desktop Dual-Pocket Charger

The NTN8968 Desktop Dual-Pocket Charger charges Motorola authorized batteries, as listed on page 56, for the i2000 phone. To charge a battery, see Figure 5.

Charging a Battery

Front Pocket

Rear Pocket

LED

Pin Connector

Power supply cord receptacle

Figure 5. Desktop Dual-Pocket Charger

1.Plug the ßat end of the power-supply cord, with the Desktop Dual-Pocket Charger logo facing down, into the receptacle labeled ÒChargingÓ on the back of the charger.

2.Plug the transformer end of the power-supply cord into any standard AC wall outlet.

3.Insert an i2000 phone with an attached battery, into the charger's front pocket. This is done by inserting the bottom of the i2000 phone onto the pin connector in the bottom of the charger's front pocket.

Page 67
Image 67
Motorola iDEN manual Desktop Dual-Pocket Charger, Vehicular Battery Charger Operating SpeciÞcations, Charging a Battery