Getting Started
Light Sensor
On your i2000 phone, when a key is pressed, the light sensor will activate the backlight only when your phone is in low light conditions. If illumination is needed, even when the backlight is not present, you can
manually override the sensor by pressing and holding 
. This will activate the backlight. In a charger, the backlight will always be illuminated.
SIM Card PIN
To prevent unauthorized use of your phone, you may set a SIM card PIN. After the PIN is set, each time the i2000 phone is turned on, a PIN must be entered. After you set a PIN, you can later change or disable it.
If your i2000 phone requires a SIM PIN, follow the steps in ÒEntering the PINÓ on page 7.
If your i2000 phone does not require a PIN and you wish to set one, follow the steps in ÒEnabling the PIN RequirementÓ on page 9.
Entering the PIN
N O T E As you enter PIN and PUK (pin unblock) numbers,
remember that pressing and holding 
dials the emergency number.
N O T E The Time and Date will not appear on your display when operating in GSM phone networks.
1.Carefully enter your PIN. As you enter it, an asterisk appears for each character. This prevents others from seeing your PIN.
Enter
SIM PIN
****
If you enter an incorrect PIN, the | Cancl |
| OK |
message, ÒWrong PINÓ appears. After three incorrect attempts, even if you turn
off the phone and turn it on again, the SIM card PIN is blocked. If this happens, see ÒUnblocking the PINÓ on page 8.
2. Select ÒOKÓ. Now you are ready to place calls or check your mail.
You can disable the PIN entry requirement. For more information, see ÒDisabling the PIN RequirementÓ on page 9.
Phone Ready
(System Name)
2:12p 07/21
Name |
