i2000 UserÕs Guide
Changing Your Call Barring Passcode
To change your call barring passcode:
1.From the Phone Ready screen, press 
until you see the ÒPrgmÓ menu option.
The time, date, and menu option, ÒLine2Ó, do not appear in GSM.
2.Press 
, 
. The Ò48=Change Bar PasscodeÓ screen displays.
3.Select ÒOKÓ. The ÒOld Code?Ó screen displays.
4.Enter your current passcode then select ÒOKÓ. The ÒNew Code?Ó screen displays.
48=Change Bar Passcode
Exit | OK |
5.Enter your new passcode then select ÒOKÓ.
6.At the ÒRepeat CodeÓ screen, enter your new passcode again then select ÒOKÓ.
Be sure to record your new passcode and store it in a safe place.
Alternate Phone Line (iDEN Only)
If your phone is activated with two phone lines, you can switch between them. To change phone lines, your phone must be at the Phone Ready screen. The following settings are independent for each phone line. When you enable a setting, it applies only to the active line.
¥Ringer Volume
¥Auto Answer
¥
¥Automatic Display Timer
¥Resettable Timer
¥Total Call Timer
¥Selectable Ring Styles
¥Call Forwarding
Setting the Active Line
At the ÒPhone ReadyÓ screen:
1.Press 
until you see ÒLine2Ó. (If you are on Line 2, you will see ÒLine1Ó.)
Phone Ready
(System Name)
11:48p 08/21
Line2 
2.Do one of the following:
¥Select ÒLine2Ó to activate Line 2 when Line 1 is the active line.
