Motorola iDEN manual Charging and Attaching the Battery, Latch

Getting Started

Charging and Attaching the Battery

Remove the battery from the protective case provided in the original packaging. When the battery is not attached to the phone or being charged, store it in this case.

Charging the Battery

N O T E Before you use the battery for the Þrst time, charge it for at least three hours.

Attach the charger connector to the i2000 phone, then ßip open the prongs and plug the charger into an electrical outlet. For more information about chargers, see ÒTravel ChargerÓ on page 57, ÒVehicular Battery ChargerÓ on page 58, and ÒDesktop Dual-Pocket ChargerÓ on page 59.

Attaching the Battery

To attach the battery to your i2000 phone, align the battery as shown. Press down on the battery until you hear a click.

Battery and Charging Status

A low battery is indicated by a short,
chirp-like sound through the speaker.
The battery strength icon shows the
remaining charge in the battery. Three	Latch
bars indicate full charge. When you
have less than Þve minutes of talk time
remaining, the indicator ßashes.

Icon

Flashes

Charging	Low Battery	0-30%	31-60%	61-90%	91-100%
Discharging	Low Battery	0-10%	11-40%	41-70%	71-100%

Figure 1. Battery Charging Status

Detaching the Battery

To detach the battery, press the latch to release the battery and pull out the battery.

N O T E Before removing the battery, make sure the phone is turned Off.