Accessories

iDEN Lithium Ion battery or may yield reduced number of charge cycles.

¥If the battery appears inoperative, the internal protection circuitry may have been activated. Remove the battery from the phone and put it into the charger for several minutes to reset the circuitry.

¥When the battery is not in use, always store it in the safety tray.

Travel Charger

Using the NPN6197 Travel Charger, you can charge a battery from an AC outlet. On one end of the travel charger, an accessory connector attaches to the bottom of the phone unit. At the other (AC outlet) end of the device, there is a compact housing that contains the plug-in power supply. A lightweight cable connects the two ends (accessory connector and supply).

A green LED on the accessory power supply indicates that the Travel Charger is plugged in.

Using the Travel Charger

Accessory Connector

Travel Charger

Transformer

Figure 3. Using the Travel Charger

1.While holding the i2000 phone with its front toward you, insert the accessory connector (with the Motorola logo facing you) into the slot on the bottom of the i2000 phone until you hear a click.

2.Plug the Travel Charger transformer into an AC wall outlet. The power light (green LED) on the accessory power supply will come on.

Travel Charger Operating SpeciÞcations

Input voltage range: 90-264 VAC @ 50/60 Hz.

Operating temperature range: 0¡C to +50¡C

Page 65
Image 65
Motorola iDEN manual Using the Travel Charger, Travel Charger Operating SpeciÞcations