Motorola MVME162 manual Slave Ending Address #1

Set Environment to Bug/Operating System

Table A-1. ENV Command Parameters (Continued)

ENV Parameter and Options	Default	Meaning of Default
Slave Ending Address #1	000FFFFF	Ending address of the local
		resource that is accessible by the
		VMEbus. Default is the end of
		calculated memory.
Slave Address Translation Address #1	00000000	This register will allow the
		VMEbus address and the local
		address to be different. The
		value in this register is the base
		address of local resource that is
		associated with the starting and
		ending address selection from
		the previous questions. Default
		is 0.
Slave Address Translation Select #1	00000000	This register defines which bits
		of the address are significant. A
		logical one "1" indicates
		significant address bits, logical
		zero "0" is non-significant.
		Default is 0.
Slave Control #1	03FF	Defines the access restriction for
		the address space defined with
		this slave address decoder.
		Default is $03FF.
Slave Enable #2 [Y/N]	N	Do not set up and enable the
		Slave Address Decoder #2.
Slave Starting Address #2	00000000	Base address of the local
		resource that is accessible by the
		VMEbus. Default is 0.
Slave Ending Address #2	00000000	Ending address of the local
		resource that is accessible by the
		VMEbus. Default is 0.
Slave Address Translation Address #2	00000000	Works the same as Slave
		Address Translation Address #1.
		Default is 0.
Slave Address Translation Select #2	00000000	Works the same as Slave
		Address Translation Select #1.
		Default is 0.
Slave Control #2	0000	Defines the access restriction for
		the address space defined with
		this slave address decoder.
		Default is $0000.
Master Enable #1 [Y/N]	Y	Yes, set up and enable the Master
		Address Decoder #1.

A

MVME162IG/D2 A-9