Motorola MVME3100 manual MOTLoad Command List, MOTLoad Commands

Chapter 3 MOTLoad Firmware

■The argument/option identifier character is always preceded by a hyphen (-) character

■Options are identified by a single character

■Option arguments immediately follow (no spaces) the option

■All commands, command options, and device tree strings are case sensitive

Example:

MVME3100> flashProgram –d/dev/flash0 –n00100000

For more information on MOTLoad operation and function, refer to the MOTLoad Firmware Package User’s Manual.

MOTLoad Command List

The following table provides a list of all current MOTLoad commands. Products supported by MOTLoad may or may not employ the full command set. Typing help at the MOTLoad command prompt will display all commands supported by MOTLoad for a given product.

Table 3-1. MOTLoad Commands

Command	Description
as	One-Line Instruction Assembler
bcb bch bcw	Block Compare Byte/Halfword/Word
bdTempShow	Display Current Board Temperature
bfb bfh bfw	Block Fill Byte/Halfword/Word
blkCp	Block Copy
blkFmt	Block Format
blkRd	Block Read
blkShow	Block Show Device Configuration Data
blkVe	Block Verify
blkWr	Block Write
bmb bmh bmw	Block Move Byte/Halfword/Word
br	Assign/Delete/Display User-Program Break-Points
bsb bsh bsw	Block Search Byte/Halfword/Word
bvb bvh bvw	Block Verify Byte/Halfword/Word
cdDir	ISO9660 File System Directory Listing
cdGet	ISO9660 File System File Load
clear	Clear the Specified Status/History Table(s)
cm	Turns on Concurrent Mode
csb csh csw	Calculates a Checksum Specified by Command-line Options
devShow	Display (Show) Device/Node Table
diskBoot	Disk Boot (Direct-Access Mass-Storage Device)

MVME3100 Single-Board Computer Installation and Use (V3100A/IH1) 19