Motorola SBV5120 manual “Setting Up a USB Driver in Windows 98” on page

Introduction

Installation

Troubleshooting Glossary License

9To connect the telephone line, plug a phone wire into the Tel 1 connector. You can also connect a second telephone line to the Tel 2 connector.

Caution

Contact your cable service provider before connecting your VoIP cable modem to your existing telephone wiring. Do not connect the telephone wire to a traditional telephone (PSTN) service.

Be sure the phone connectors are neither connected together nor connected to wall jacks on the same network.

Setting Up a USB Driver

The following subsections describe setting up a USB driver. Perform the appropriate procedure for your Windows version:

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive before you plug in the USB cable.

•

•

•

•

“Setting Up a USB Driver in Windows 98” on page 10

“Setting Up a USB Driver in Windows 2000” on page 15

“Setting Up a USB Driver in Windows Me” on page 14

“Setting Up a USB Driver in Windows XP” on page 18

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP” on page 19.

The SURFboard VoIP cable modem USB driver does not support Macintosh or UNIX computers. For those systems connect through Ethernet only.

Home Print

X	9	SBV5120 Series VoIP Cable Modem User Guide
Exit