Introduction
Installation
Troubleshooting Glossary License
7Select the Protocol option and click Add. The Select Network Protocol window is displayed:
8Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocol section of Select Network Protocol window.
9Click OK.
10Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the one for the Ethernet card or USB port connected to the VoIP cable modem.
11Click Properties. The TCP/IP Properties window is displayed:
12Click the IP Address tab.
13Click Obtain an IP address automatically.
14Click OK to accept the TCP/IP settings.
15Click OK to close the Network window.
16Click OK when prompted to restart your computer and click OK again.
Home Print
X | 21 | SBV5120 Series VoIP Cable Modem User Guide |
Exit |
|
|
