Motorola SC-725 Placing and Ending Calls, First check that your phone is on To place a call

Placing and Ending Calls

First check that your phone is ON.

To place a call:

1.Extend the antenna completely for best performance.

2.Open keypad cover to expose the keypad.

3.Enter the number you want to call, for example: 555-1234.

Press ‚ to erase one digit at a time if you make a mistake.

Hold ‚ to erase the entire entry.

4.Press ¾ to place the call.

You will see: Dialing 555-1234. or

Press & hold Smart Button until you hear a high tone. You will see: Dialing 555-1234.

You can dial phone numbers with up to 32 digits, but only the last twenty-four digits will appear in the display.

Press ä to see the rest of the number.

Your phone will display the first 24 digits, then a second screen will show the remaining digits in the phone number.

To end a call:

Close keypad cover to hang up your phone. or

Press ¼. or

Press & hold Smart Button until you hear a high tone. You will see: Press ¤ to End Call.

then

Press Smart Button again to end the call.

Placing a Call

Ending a Call

The Basics

29