Moxa Technologies DE-308, DE-303 manual Setting Up Single-Host, NPort Server Pro User’s Manual

Setting Up Single-Host

3.The Replace Server… window that opens up shows a list of servers that you have not configured. You can identify the new server by looking at the serial number.

4.Confirm the Server with the pop-up window.

5.If the new server is password protected, enter the pre-set password when prompted to do so.

6.Click OK to save the current settings to the new server.

7.Click on Save Configuration to activate.

.Note:Previous configurations,

including server name and port settings, are retained after going through the above described Replace Server procedure. However, the server password will be set to the one you entered during the replacement procedure, so you will need to start using the new password to access the server.

NPort Server Pro User’s Manual 4-17