MRV Communications LX-4000 Series manual 451-0308

Configuring the LX-4000 Series for the First Time

2.Press b to boot the LX-4000 unit. The setup takes a minute or two. The The unit has loaded to factory defaults, would you like to run Initial Connectivity Setup? y/n message appears.

3.Press y (yes) and press Enter. The “Enter your superuser password” message appears, fol- lowed by the Superuser Password prompt.

4.Enter superuser password system. The Quick Configuration menu appears:

Quick Configuration menu

1 Unit IP address

2 Subnet mask

3 Default Gateway

4 Domain Name Server

5 Domain Name Suffix

6 Cluster Secret

7 Superuser Password

8 Exit and Save

Enter your choice:

5.Press the number corresponding to the parameter you want to set.

6.Enter the appropriate information and press <Enter> to return to the Quick Configuration menu. Once you enter a parameter value, a data entry line specific to that parameter appears on the Quick Configuration menu.

7.Continue in this way through the menu, configuring as many parameters as you want. You are not required to configure all parameters.

NOTE: You should change the Superuser Password, since this is the first time you are configuring the LX-4000 unit (the default password is system). The login username and password are case-sensitive.

26 MRV Communications, Inc. www.mrv.com 451-0308