Alternative Port Capabilities
2. Connect the other end to any port you have configured as a sensor port.
RJ45
1.0A 50/60Hz
1 | 2 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
15 |
TELCO
LINE
RCV LINK
100
DIAG 10/100 ETHNT
Figure 16 - Connecting the Temperature/Humidity Sensor
You must change the port’s “access” to “sensor” before performing any monitoring. Use the following command, in the Async Port Configure Mode, to configure asynchronous port 4 as a Sensor Port:
Async 4-4:0>>access sensor
Once the sensor is enabled, you can check the temperature with the following command:
InReach:0>> show port async 4 status
3.You can also monitor the temperature/humidity remotely through the LX CLI. Refer to the LX- Series Commands Reference Guide for a detailed explanation of the commands used to configure and view your temperature/humidity sensor through the CLI interface.
5250 Power Management
The 5250 Power Control Series family of products provides easy, practical, and secure solutions for power distribution, power management and
5250 Power Control Series products are available in a variety of models for
See the Technical Specifications Appendix for more information about available 5250 Power Control Series models.
The following section explains how to connect and install the 5250.
38 | MRV Communications, Inc. | www.mrv.com |
|
